|
|
ProFlo 40 Mil Gray Shower Pan Liner 5ft wide
Code: PROFLO-40-5
Price: $13.00
Quantity in Basket:
none
|
PVC SHOWER PAN LINER ( SOLD BY THE LIN.FT/RUNNING FT )
Inexpensive solution for lining shower stalls, saunas, floor drains, or sunken tubs.
PVC flexible shower pan liners have been successfully used for many years in place of sheet lead, copper,
or hot mop shower pan linings. Liner marked in 6 IN increments for ease of measuring.
Superior cold weather characteristics. UPC, SBCCL, and BOCA listed. Conforms with
ASTM Specification D4551. 40 mil. gray.
Made By Hpg International,Inc.
To order this Product click here so you can order by the lin.ft required.
|
| |
|
|
|
|
ProFlo 40 Mil Gray Shower Pan Liner 6ft wide
Code: PROFLO-40-6
Price: $15.00
Quantity in Basket:
none
|
PVC SHOWER PAN LINER ( SOLD BY THE LIN.FT/RUNNING FT)
Inexpensive solution for lining shower stalls, saunas, floor drains, or sunken tubs.
PVC flexible shower pan liners have been successfully used for many years in place of sheet lead, copper,
or hot mop shower pan linings. Liner marked in 6 IN increments for ease of measuring.
Superior cold weather characteristics. UPC, SBCCL, and BOCA listed. Conforms with
ASTM Specification D4551. 40 mil. gray.
Made By Hpg International,Inc.
To order this Product click here so you can order by the lin.ft required.
|
| |
|
|
|
X-15
Code: Oatey
Price: $13.48
Quantity in Basket:
none
|
To order this Product click here.
OATEY
BONDING ADHESIVE – X15
FOR BONDING OR SEAMING PVC SHOWER PAN LINER TO ITSELF
DIRECTIONS FOR USE.
1. For large showers pan material may have to be seamed to adequately cover the floor, wall and
curb area.
Clean surfaces to be joined from dirt, grease, water or any other debris that may
interfere with
the bonding process.
2. Apply an even coating of adhesive with a brush or dauber applicator to both surfaces with a 2”
overlap.
3. For best instant strength on contact, allow solvent coating to partially dry
(approximately 15-30
seconds after applying X-15 to material)
at which time both surfaces should be extremely tacky.
Join
the two surfaces and apply pressure using a paint roller or 2 x 4 wood section over the freshly
bonded
seam for 2-3 minutes.
Observe the outer seam to make sure there are no gaps.
4. Do not disturb the liner immediately after assembly.
Place a heavy object over the entire seamed
area during cure period.
This will help provide a strong bond between the pan liner surfaces.
Good
handling strength will develop in approximately two to four hours.
Allow overnight cure before
water testing a shower pan assembly.
______________________________________________________________________________________
CONDITIONS TO AVOID
1. PUDDLING – Excess adhesive will delay cure and handling strength.
A thin, even coating on
both surfaces to be joined is ideal.
2. CURE – is temperature dependent. The lower the ambient temperature, the slower the cure.
Ideal application temperatures range from 60 to 80 degrees Fahrenheit.
Avoid working in direct
sunlight.
3. NEVER use Plastic Pipe solvent cement for seaming PVC shower pan liner.
4. NEVER use Oateyweld bonding adhesive to seam PVC pan liner material.
Oatey X15 Bonding
Adhesive is the only approved adhesive you will need for
seaming Oatey PVC Shower Pan Liner.
|
| |
|
|
