|
|
PRO-SLOPE 40 x 40 KIT
Code: PRO-SLOPEKIT
Price: $45.42
Quantity in Basket:
none
|
PRO-SLOPE 4040 = 1016mm x 1016mm (40"x40")
NOBLE PRO SLOPE provides the code required
slope to weep
holes in a clamping ring drain in the shower receptor.
Install
PROSLOPE under a reinforced mortar bed (which is generally
1-1/4" thick mixture of a 1:4
mix of portland cement to sand).
NOTE: A sheet membrane like Chloraloy
must be installed over PRO-SLOPE.
PRO-SLOPE is a patented preformed composite made from
low density EPS with a reinforced cardboard
cutting template on one
side.
The EPS is tapered to produce a slope under the waterproofing
membrane.
|
| |
|
|
|
PRO-SLOPE 20 x 40 Extensions
Code: PRO-SLOPEEXT
Price: $20.17
Quantity in Basket:
none
|
Extensions = 508mm x 1016mm (20" x 40")
If you are installing a PS4040 (40” x 40”),
and the wall is more than 20” from the center of the drain you
can do either of the following:
i. Use a PRO-SLOPE Extension.
Note: Extensions are not sloped. If a slope is desired, it can be
created with mortar over the Extension.
|
| |
|
|
|
PRO-SLOPE 60 x 60 Kit
Code: PRO-SLOPE6060
Price: $120.17
Quantity in Basket:
none
|
Each Pro-Slope Kit comes with a preformed 60" x 60" composite that is sloped in all directions to the center,
a Positive Weep Protector and instructions.
|
| |
|
|
|
|
Pro-Slope Flat Extension 30" X 60"
Code: PRO-SLOPE3060
Price: $91.45
Quantity in Basket:
none
|
Pro-Slope Extensions are an accessory available for use with ProSlope where the walls are more than
30 inches from the center of the drain.
|
| |
|
|
